Wall Mounting Instructions
Before You Start
Please ensure the mounting surface is clean, smooth, and free from loose debris before installation.
- 01
Create Your Drilling Template
Place the house sign face down on top of an A4 sheet of paper. Apply light pressure to allow the mounting brackets to leave indentations or markings on the paper.
- 02
Position the Template
Hold the paper against the wall in your desired location. Using a spirit level, ensure the markings are perfectly level. Once aligned, secure the paper to the wall with masking tape.
- 03
Drill the Holes
Using a 5mm drill bit, drill four holes through the marked positions on the template. Insert the supplied wall plugs into each hole.
- 04
Install the Stand-Off Mounts
Screw the four female stand-off mounts into the wall plugs until securely fastened.
- 05
Fit the House Sign
Align the mounting brackets on the rear of the sign with the stand-off mounts installed on the wall. Press the sign firmly onto the mounts until all four fixing points click securely into place.
Installation Complete
Your Designed By Rich illuminated house sign is now installed and ready to enhance your home's appearance.
Contents Included
- ✓Custom House Sign
- ✓4 x Female Stand-Off Mounts
- ✓4 x Wall Plugs
- ✓4 x Screws
Need Assistance?
If you require help with installation, please contact us and we'll be happy to assist.